New table saw is all dialed in now

Last night I took the blade guard off and then aligned the blade and put the guard back on. This time I was very careful in how I lined things up. Tightened stuff back down and then tested the alignment with a 2 foot long piece of leftover 2×4. Wood went through the saw with no problems at all. Actually works great. I am using the cheap steel blade that came with the saw and it went through it with no problems and the anti-kickback device works great also. You can let go of the piece of wood and it doesn’t move, then you can go around to the other side and pull the wood the rest of the way through.